Kidsflex - Disabled Child Car Seat
Adjustments Kidsflex 1 and 2
1. Seat Depth Adjustment
Remove the Seat Cushion.
Loosen the screws (1) and slide the
Seat Depth Adjustment Plate to the
desired position.
Retighten both screws (1) and refit
the cushion.
2. Backrest Recline Adjustment
Open the Quick Release Levers (1) both
sides. Recline to the desired position
and close the Quick Release Levers.
3. Support Harness Adjustment
Close the buckle by overlapping the
harness tongues, then press into the
buckle. Open by pressing the red button.
Ensure all belts are free with no twists.
Place the child in the seat ensuring they
are seated to the back of the cushion.
Connect the 5-point harness.
Pull the Lap belt (2) comfortably tight.
Adjust the Shoulder belts (3) each side,
you should only be able to place your flat
hand inside the shoulder belt after
tensioning.
Regular adjustments are required to
the harness for example when the
child is wearing different clothes.
4. Removal of Cushions
Remove the backrest cushion by pulling the harness shoulder straps
through the pad. Remove the pad. Open the zip to remove the cover.
Remove the seat cushion by undoing the crotch strap, then simply
peel the cushion from the velcro Open the zip to remove the cover.
5. Setting the Shoulder Seat Belt Guide
The seat belt guide must be set to
the appropriate height for the child.
Loosen both nuts (3) behind the cushion.
Open both Allen screws (2) on the rear
of the seat.
Slide the guide to the correct position, then
Retighten both Allen screws (2), then
retighten Both locking nuts (3)
-6-
