Instructions for use: ISOFIX
–
Mounting Bracket
Our seats are available with an Isofix Adapter Bracket option, in place of the regular clamp style Stability
Bracket. The Isofix Adapter Bracket allows the seat to locate to existing Isofix attachment points in all cars
after 2006. As it is a mechanical connection the Isofix Adapter Bracket offers more support and greater stability
for the child seat in the car.
Caution: Our Isofix Adapter Bracket is for location and stability purposes only, the vehicles
3-point seat belt must always be used to secure the passenger. Please read carefully and
understand the User Instructions provided with your car seat.
Installation:
1.
Position the Isofix Adapter Bracket into the
rectangular tubes provided to the rear of the base
plate on the seat. Turn both Allen screws (1) each
side but do not tighten.
2.
Extend (slide) the isofix bracket out from the
seat and pinch tighten the Allen screws (1)
3.
Line up the Isofix latches with the car
’
s Isofix brackets
then push the car seat back on both sides until a clearly
audible click is heard from both Isofix latches.
4.
Set the required angle of the car seat
backrest (see User Instructions).
Now loosen both Allen screws (1) both sides,
slide the car seat against the backrest of the
vehicle seat, ensuring there is contact.
5.
Tighten both Allen screws on both sides to
lock the Isofix Adapter Bracket in place.
6.
Secure the Isofix latches from inadvertent
opening by tightening the thumbscrews (2)
provided both left and right side.
7.
Check to verify that the Isofix latches are securely
locked in place.
1
2
Removal :
1.
Loosen both thumbscrews (2), left and right.
2.
Pull both thumbscrews simultaneously, forward
toward the child seat to unlock the Isofix latches.
3.
You may now remove the car seat.
1
2