Kidsflex - Disabled Child Car Seat
Seating the Child
1.
Kidsflex is designed and
intended for use only in
the rear seat of a car
2.
Open the Child Support Harness
and if necessary release some strap
to make room in the harness.
3. Turn the seat to face out of the
vehicle for easier access (only
with swivel base option).
4. Swing open the trunk supports
(if this option is fitted).
5. Position the child.
6.
Close the 5-point support harness,
and adjust to comfortably tight.
7. Turn the seat into the vehicle until
the lock clicks shut.
8. Secure the child with the 3-
point vehicle seatbelt (1).
Thread the seatbelt
through the belt guides
provided at both lap and
shoulder positions.
9. Position the padded play tray /
crash pad (2) and fix in place
with the velcro straps provided
on both sides (optional).
Care and Maintenance
1. Check all screw connections and moving parts for tightness at 8 week
intervals, service where necessary.
2. Clean with a dry cloth, if necessary use a mild detergent to clean stubborn dirt.
3. The covers are removable, for hand wash at 40 degrees.
Disposal
-
Delivery Packaging is recyclable.
-
All metal parts can be recycled as scrap metal.
-
All other parts (foams, covers), disposal must be in accordance with your
national regulations. Please check with your local authority waste disposal
offices.
-10-