Z
© 2015 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
TM
Locale is among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1bdpwm rev B.
2
1. Measure and mark pass through hole on uppercase.
a. BRMS.FD
i. 879.2 mm from the side of the upper case
ii. 75.9 mm out from the back panel
b. BRMS.PD
i. 279.2 mm from the outer side panel
ii. 75.9 mm out from back panel
Steps:
2. Drill a 1 inch diameter hole at that spot.
BRMS.FD
BRMS.PD
879.2 mm
75.9 mm
75.9 mm
279.2 mm
