Z
© 2015 Herman Miller, Inc. Zeeland, Michigan. Printed in the U.S.A.
TM
Locale is among the trademarks of Herman Miller, Inc.
Illustrations and specifications are based on the latest product information available at the time of publication.
The right is reserved to make changes in design and specifications at any time, without notice, and also to discontinue products.
Part no. 1bdpwm rev B.
4
6. Thread the 4” 1/4-20 fasteners through
the guide holes in the display panel, into
the studs.
7. Torque to 15 ft-lbs.
D
Disassembly and Recycling:
Materials Identification and Segregation:
Where possible, plastic components are marked with ASTM recycling codes. Use
these codes to identify material type for recycling. Non-marked components should
be treated as mixed plastic. Ferrous metals can be identified using a small magnet
for recycling. Non-ferrous metals should be separated and recycled separately.
To disassemble product, reverse the above installation steps.
