Air hose connections
Connect the black 5/32" air hose between the regulator
and the air in port of the limit valve located on the rear leg
of the gun washer. Press tubing in through the collar until
seated. Pull firmly on hose to test for a tight connection.
(see fig.3).
Note: Air-in port of limit valve is the port opposite the roller.
Connect the blue 5/32" air hose between the air in port of
limit valve located on the front leg and the air out port of the
limit valve located on the rear leg of the gun washer.
Press tubing in through the collar until seated. Pull firmly on
hose to test for a tight connection (see fig.3).
Connect the clear 5/32" air hose between the pump and
the air out port of the limit valve located on the front leg
of the gun washer. Press tubing in through the collar until
seated. Pull firmly on hose to test for a tight connection.
(see fig.3).
Lid assembly and attachment
Attach the handle to the front of the lid using (2) 10-24 x 1/2
STEP 10
Assembly
STEP 8
STEP 9
STEP 11
fig.3
Limit
valve
Limit
valve
Black air
hose
Blue air
hose
Clear air
hose
STEP 14
STEP 15
ttac t e a d e to t e o t o t e d us g ( ) 0
/
stainless screws, (2) #10 nylon washers, and (2) 10-24
stainless nuts (see fig.4).
Attach the actuator bracket to the right side of the lid using
(2) 10-24 x 1/2 stainless screws, (2) #10 nylon washers,
and (2) 10-24 stainless nuts (see fig.4).
Attach the (2) hinges to the rear of the lid using
(1) 10-24 x 1/2 stainless screw, (1) #10 nylon washer
and (1) 10-24 stainless nut for each hinge (see fig.4).
Note: Install the internal ground wire while attaching the
hinge on the actuator side of the lid (see fig.5).
Place the lid on the tub and align the holes in the hinges
with the inserts in the lip of the tub. Use (2) 10-32 x 3/8
black screws and (2) #10 flat washers to secure the
hinges to the tub. Finger tighten screw closest to the
actuator bracket.
Note: If the lid does not sit flat, extra washers should be
added beneath the hinges at either side to ensure the lid
sits flat on the tub.
Refer to the parts call-out for the lid assembly on pg.14
for descriptions and placements of parts.
STEP 13
STEP 12
STEP 14
fig.3
Limit
valve
Limit
valve
Black air
hose
Blue air
hose
Clear air
hose
fig.4
STEP 12
STEP 14
STEP 13
STEP 15
fig.5
Ground
terminal
Ground
terminal
Washer
Nut
Page 6 of 19
