HERKULES 3906220931, Instruction Manual

Page: 23 / 104

23 І 104 23 І 104
of waste equipment may have negative consequenc -
es for the environment and human health due to po-
tentially hazardous substances that are often con-
tained in electrical and electronic equipment. By
properly disposing of this product, you are also con-
tributing to the effective use of natural resources.
You can obtain information on collection points for
waste equipment from your municipal administration,
public waste disposal authority, an authorised body
for the disposal of waste electrical and electronic
equipment or your waste disposal company.
Old devices must not be disposed of with house-
hold waste!
This symbol indicates that this product must
not be disposed of together with domestic
waste in compliance with the Directive
(2012/19/EU) pertaining to waste electrical
and electronic equipment (WEEE). This product must
be disposed of at a designated collection point. This
can occur, for example, by handing it in at an author-
ised collecting point for the recycling of waste elec-
trical and electronic equipment. Improper handling
11. Troubleshooting
Repairs
Only use manufacturer‘s recommended accessories and replacement parts. If the unit should fail despite our quality controls and
your maintenance, only allow an authorised electrician to carry out repairs
Fault Possible cause Remedy
Engine does not
start
Automatic oil cut-out has not
responded
Check oil level, top up engine oil
Spark plug fouled Clean or replace spark plug (electrode spacing 0.6 mm)
No fuel Refuel / have the petrol cock checked
Generator has too
little or no voltage
Controller or capacitor defective Contact your dealer
Overcurrent circuit-breaker has
triggered
Actuate the circuit-breaker and reduce the consumers
Air filter dirty Clean or replace the filter
Maintenance schedule
Please adhere to the following maintenance periods in order to ensure a failure-free operation.
IMPORTANT! The equipment must be filled with engine oil and fuel before it is started.
Before each
use
After an
operating
period of 20
hours
After an
operating
period of 50
hours
After an
operating
period of 100
hours
After an
operating
period of 300
hours
Checking the engine
oil
X
Changing the engine
oil
For the first time,
then every 50
hours
X
Checking the air filter
X Change the
filter insert if
necessary
Cleaning the air filter
X
Cleaning the petrol
filter
X
Visual inspection of
the equipment
X
Cleaning the
spark plug
Distance: 0.6
mm, replace if
necessary
Checking and
readjusting the throttle
vale on the carburetor
X*
Cleaning the cylinder
head
X*
Set the valve play
X*
Important: The positions marked with “x*“ should only be carried out by an authorized dealer.
GB