Herkules Hebetechnik GmbH K1200-HLS-61, Operating Manual And Test Record

Page: 35 / 46

S
AFETY
I
NSPECTION
35
12.1 Regular safety check
(In accordance with §10 ( 2 ) German Health and Safety regulations !)
Device type
Serial number
Inspection result
Start-up not permitted, verification required
Start-up possible, faults to be rectified by: ...............................................
No fault, start-up possible immediately
Safety inspection performed on:
……………………………………................................................
Name and address of qualified personnel ............................................................................................
………………………………………… ………………………………………..
Signature of competent person Signature of operator
With the required rectification of faults
………………………………………… ………………………………………..
Signature of competent person Signature of operator
Inspection step
OK
No
t O
K
re
-
ex
amin
ati
on
Remark
Nameplate
Sign with lifting capacity
Sign with bar mains pressure
Operating instructions (abbreviated)
Designation lift - lower
Secure fit of all supporting screws
Safeguard of the scissor pins
condition of the pneumatic lines
safety valve set to 3.5 bar operating pressure
Pressure gauge bar mains pressure P
max
= 8 bar
Control lever returns automatically to the '0' position when
released
Safety catch function
Loading ramps function
Interim drive over ramp function ( only HLS1200-61 )
Roll-off protection function
Protective flaps function ( only HLS1200-64 )
Function CE-Stop (only HLS1200-66)
Condition of the air bags
Condition of the supporting structure
Condition grounding line (only HLS1200-64-66)
Functionality of the service lift with vehicle