8 of 20
brand. The said risks can be minimised if the
instruc�ons and recommendations included in this
manual are followed.
• When installing the stove, observe the
necessary safety distances for the stove and
chimney from combustible surfaces (wooden
or papered walls, wooden floors...). Safety
distances must be respected when the lining on
walls or nearby areas may be damaged or
deformed by temperature (varnish, paint,
PVC...). Fig. 6
• The base where you are going to install your
heater must be flat and provide a perfect seat.
The said base must also be capable of
supporting the weight of the heater. The base
must be built using heat resistant materials.
• All the area around the heater should must be
heat resistant. If not, they must be protected by
fire-proof material.
• Ash should be emptied into a metal container
and immediately removed from the house.
• Do not use flammable liquids to light the stove.
Keep any type of flammable liquid (petrol,
gasoline, alcohol,....) at a distance from the
fireplace.
• Never use coal or fuels that are not
recommended for the operation of this
product.
• Periodically inspect the chimney and clean
whenever necessary. Also inspect the state of
joints, glass, screws...
•
Protect your hands with a glove or other
insulating material because, during opera�on,
the opening and closing handle will be hot.
OUTSIDE AIR CONNECTION
• When installing the stove using the outside air
connection,
we
recommend
that
the
installa�on
is
performed
by
qualified
personnel.
• Always keep in mind that air is entering the
stove through the connector. This air inlet can
never be blocked. Ensure that the pipe
connecting the stove to the outside cannot be
crushed and that the entrance to the pipe
cannot be blocked on the outside. It is
necessary to cover the inlet with a protec�ve
grill.
• The location of the outside air inlet of air must
be protected from the wind to avoid a possible
posi�ve or nega�ve pressure from affecting the
combustion of the stove.
• Refer to the technical specifica�ons at the end
of this manual for the minimum diameter and
the maximum length of the pipe to be
connected.
FIG. 6 - SAFETY DISTANCES
