4 of 20
1 - INTRODUCTION
IMPORTANT! All local regula�ons, including
those that refer to national or European
regula�ons, must be applied when installing this
device.
The way the E-30 Stove is installed will decisively
affect safety issues and its correct opera�on.
It is important to install the fireplace correctly. For
the correct installation of the E-30 Stove and
chimney, we recommend the installa�on be
performed by a professional.
The E-30 Stove provides heat by radia�on; directly
heating walls, ceilings...
2 - PRESENTATION
E-30 wood stoves have the following main
features:
•
Made in 3 sizes: L, M and S, to meet each
users’ heating requirements.
•
Made of cast iron, with parts that are
assembled, sealed and screwed together.
•
Cast iron or Vermiculite lined. (By model)
•
They are designed for use with firewood
only.
•
They can burn pieces of wood up to 40, 50
or 60 cm. in length, depending on the
model. See the table on page 12
•
Ligh�ng up valve
•
Primary air adjustment valve.
•
Self-cleaning glass.
•
Hinged front door opening 180º with
ceramic glass pane.
•
Ash pan with cover
•
Op�onal outside air connec�on located on
the back of the ash pan.
•
Ver�cal top smoke flue
•
In model E-30 M also horizontal outlet
through the back (MT model)
•
Fully factory assembled, ready for
connection to the chimney.
Outside air
connection
Door handle
Secondary
/glas
s
cleaning air
control
Primary l
igh�ng u
p
control
FIG. 2
Ashpan
