Here IAN1DX0TND9, User Manual

Page: 96 / 161

97
Voice recognition commands are classifi ed as “Global Commands” and “Local Commands”.
• Global commands (●) : Commands that can be used immediately after activating voice recognition.
• Local commands (□) : Commands that can be used in specifi c multimedia/navigation/Bluetooth mode states.
,
NOTE
Some global and local commands will operate properly only when a USB, iPod, Bluetooth or other device has been connected.
PHONE COMMANDS
• Voice commands related to phone calls can be used after connecting the Bluetooth phone device.
• To call a person, for example “Call <John Smith>” whose name is listed in contacts, you must fi rst download the mobile phone contacts. (Up to 5,000
mobile phone contacts can be downloaded.)
• After downloading the Bluetooth phone contacts, it will take some time to convert the phone contacts into voice data during which time you cannot
make a call by name yet. The time that it taken to convert voice data may vary depending on the number of contacts downloaded.
Command Operation
● Call Downloaded mobile phone contacts is displayed on the screen, and afterwards, you can make a call by speaking the name.
●
Call <Name>
You can immediately make a call to (name) in the downloaded mobile phone contacts.
Ex) “Call John Smith”
●
Call <Name> on
Mobile
You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘mobile’.
Ex) “Call John Smith on mobile”
●
Call <Name> at
Work
You can immediately make a call to (name) in the downloaded mobile phone contacts saved as ‘offi ce’.
Ex) “Call John Smith at work”
VOICE COMMAND LIST
VOICE COMMAND LIST