MY20H06-2_1.0_26.08.2019
72
Operation
6.14.2 Using the back-pedal brake
Only applies to pedelecs with this equipment
The best braking effect is achieved if the pedals
are in the 3 o'clock and 9 o'clock position when
braking. To bridge the free travel between the
riding movement and the braking movement, it is
recommendable to pedal a little beyond the
3 o'clock and 9 o'clock position before you pedal
in the opposite direction to the
direction of travel
and start braking.
Pedal in the opposite direction to the
direction of
travel
until the desired speed has been reached.
6.15
Suspension and damping
6.15.1 Adjusting the compression of the
Fox fork
Only applies to pedelecs with this equipment
The compression adjuster makes it possible to
make quick adjustments to the suspension
behaviour of the fork to suit changes in terrain. It
is intended for adjustments made during the ride.
Figure 75: FOX compression adjuster with the OPEN (1) and
HARD (2) positions
Compression damping is lowest in the OPEN
position, making the fork feel softer. Use the
HARD position if you want to the fork feel stiffer
and you are riding on soft ground. The lever
positions between the OPEN and HARD
positions enable fine adjustment of compression
damping.
We recommend setting the lever of the
compression adjuster to the OPEN mode position
first.
6.15.2 Adjusting the compression of the
Fox damper
Only applies to pedelecs with this equipment
The compression adjuster makes it possible to
make quick adjustments to the suspension
behaviour of the damper to suit changes in terrain.
It is intended for adjustments made during the
ride.
Figure 76: FOX compression adjuster on the rear frame
damper with the OPEN (1), MEDIUM (2) and HARD (3)
positions
Use the OPEN position for rough descents, the
MEDIUM position for rough terrain and the HARD
position for efficient climbing. First set the
compression adjuster to the OPEN position.
Figure 77: Fine adjustment of the OPEN position is made
using the adjuster (4)
The FOX rear frame damper features fine
adjustment for the OPEN position.
We recommend that fine adjustments be made
when the compression adjuster is in the MEDIUM
or HARD position.
Pull out the adjuster.
Turn the adjuster to position 1, 2 or 3. Setting 1 is
for the softest riding performance, whereas 3 is
for the hardest.
Press the adjuster in to lock in the setting.
11
2
1
2
3
4
3
2
1
