6.3 Mid Cut On/Off
The switching function “Mid Cut” is applicable to all channels. The
Mid Cut is active when the corresponding LED is lit.
6.4 Loop On/Off
This function activates a device that is connected to the switch-able loop.
6.5 Mute On/Off
“Mute” silences the beast. “Tuner Out” stays active. Makes sense, no?
6.6 Master 2 On/Off
Master 2 can be used for all channels, much like the Mid Cut function.
6.7 Store
As discussed earlier, this is the universal programming button.
Activating this button twice will verify an intended program procedure.
In case you have pushed this button once by accident, or if you have
started to program and don’t want to anymore for whatever reason,
then you can push any other switch (any switch but the “Store” switch)
to cancel the programming procedure. The previously established
program will be preserved. On models equipped with GPS, this will call
out the quickest way to a near by music store.
