output of your effects unit to the parallel return. Now you can switch
the send to the effects unit on and off via midi, with the effects signal
decaying naturally when the loop is turned off.
3.2.6 Tuner Out
You guessed it – it’s for a guitar tuner. Stays lit while mute is
activated. So you can tune without annoying your band members, or
the audience. Elegant, no?
3.2.7 Compensated Out
A frequency corrected signal will leave this jack if you connect it to a
mixer or recording device. Use it to quietly compose or send an
auxiliary signal to a console etc. For quiet sessions, just turn the
master volumes to “0”. Recording a loudspeaker through a microphone
is the preferred choice of recording engineers. The compensated out
was designed as an alternative for those of you that don’t have a
studio at your fingertips.
3.2.8 Speaker Connections
Herbert has 5 speaker jacks: 1 for a 16-Ohm load, 2 for 2 16-Ohm
loads or 1 8Ohm load, and 2 for 2 8-Ohm loads or 1 4-Ohm load.
Confusing? Oh, yes! Just do what it says on the jacks, and you’ll be
fine
