Heras HGD230, User Manual

Page: 109 / 146

EN – Translation of the original user manual - 2.1 | 2019 109
11 DECOMMISSIONING AND REMOVAL
Ensure that the gate is dismantled by a qualified technician.
Disconnect the electricity supply in a safe way from the drive unit.
Use the installation manual.
At the end of their service lives the products must be disposed of in accordance
with all local, regional and national rules and instructions. The sliding part is
mainly made of aluminum and steel parts. The guideposts are made of steel.
Heras is also happy to take the products back and then dispose of them in an
appropriate manner.
The Delta, uGate and iGate gates have highly tensioned cables fitted in the
bottom rail. If these cables are cut, they can snap with great force. This can
lead to serious injury. Therefore, it is prohibited to disassemble the
bottom rail yourself.
!! Only people trained by Heras are allowed to disassemble the
bottom rail.
There is no hidden danger associated with dismantling the bars, top rail and stiles.
The points that are fitted to some sliding gates are sharp. There is a danger
of being cut when disassembling such a gate. Wear suitable gloves.
The master drive is fitted with a battery of the type CR 2032.
Disposing of batteries as domestic waste is not allowed. Spent batteries can be
handed in for free at the public municipal collection facilities and at all points of
sale where batteries are sold. You can also return any batteries bought from us to
us after use. In this way you will be making an important contribution to
conserving the environment!
12 SPARE PARTS
Use a CR 2032 button battery to replace the battery (Illustration 18:) of the
integrated clock.