background image

---

Do not extend the tool too far and do not cut above the shoulder. This helps prevent 

the guide head from touching the object and gives better control of the tool in unexpected 
situations.

 

---

Use only replacement guides and chains specified by the manufacturer Improper 

replacement guides and chains may cause chain breakage or rebound.

 

---

Maintain the chainsaw following the manufacturer's polishing and maintenance 

instructions. Lowering the depth gauge will cause frequent bounces.

 

 

Please keep this instruction manual.

 

 

  

Warning: 

Do not be too familiar with the product (experience gained from repeated 

use) to not strictly follow the relevant product safety rules. Improper use or failure to 
follow the safety rules in the instructions can result in serious personal injury.

 

 

Special safety instructions for battery pack and charger 

1.  This  appliance  is  not  intended  for  use  by  persons  (including  children)with  reduced 

physical,  sensory  or  mental  capacities,  or  lack  of  experience  and  knowledge,  unless 
they  have  been  given  supervision  or  instruction  concerning  use  of  the  appliance  by  a 
person responsible for their by person responsible for their safety. 

2.  Children should be supervised to ensure that they do not play with the appliance.  

3.  If under extreme conditions any electrolyte should escape from the battery, it's essential 

to avoid contact with skin. If electrolyte does come into contact with your skin, rinse it off 
with water. In the event of electrolyte contact with your eyes,  it's essential to consult a 
doctor. 

4.  Before  the  use  of  the  charger  and  the  battery  pack,  read  the  instruction  manual  for  it 

carefully. 

5.  During  the  charge  process,  the  current  used  should  correspond  to  the  current  of  the 

battery charger. 

6.  Never let moisture, rain or splashed water reaches the charging location. 

7.  Protect the battery pack and charger from moisture and heat. The ambient temperature 

must not exceed 40

°

C. Never expose the device to direct sunlight. 

8.  Only switch off the current when the battery pack has been inserted into the box or has 

been pulled out of the box. 

9.  Battery packs, which are defective or damaged or can no longer be recharged, must be 

disposed  of  as  hazardous  waste.  Hand  them  over  at  a  special  collection  point.  Never 
harm  our  environment.  Do  not  throw  unusable  storage-battery  packet  away  into  the 
domestic waste, into fire or into water. 

10. Use only a battery pack, which has been produced by the original manufacturer. 

11. Always keep the surface of the charger free from dust and dirt. 

12. Insert  the  battery  pack  into  the  charger.  Follow  the  guidelines  provided  concerning 

polarity. 

13. Always remove battery pack before working on the power tool. 

14. When  the  battery  packet  is  outside  the  power  tool,  cover  the  contacts  to  avoid  short 

circuits (e.g. from tools) 

15. Do not throw battery packs into water or fire, risk of explosion! 

Summary of Contents for H20LJ08


















Reviews: