Step 1: Place the chainsaw on a flat, exposed surface and ensure that no objects or
obstacles are in contact with the guide plate and chain;
Step 2: Release the chain brake by pulling the chain brake;
Step 3: Start the chainsaw;
Step 4: Push the chain kick brake handle toward the front of the saw. A properly
operating hand brake will immediately stop the chain movement. If the chain brake does
not work properly, do not use the chain saw until it has been repaired by a qualified
maintenance technician.
Warning:
Make sure the chain brake works properly before each use.
Warning:
If the chain brake is blocked by wood chips, the function of the chain
brake may degrade. Please keep the equipment clean at all times.
F) Maintenance
Notice
：
---
Before inspecting or maintaining the tool, be sure to turn off the power and remove
the battery pack.
---
Be sure to wear gloves when performing any inspection and maintenance operations.
---
Do not use gasoline, benzene, thinner, alcohol or similar cleaning tools. Failure to do
so may cause tool discoloration, distortion, or cracking.
Polish the chain:
Notice
：
---
When maintaining the chain, be sure to remove the battery pack and wear safety
gloves.
Polish the chain under the following conditions:
●
When pulverized sawdust is produced by cutting wet wood;
●
When the chain is difficult to penetrate the wood, even with greater force;
1
