User manual // Speed Max
20
HENSEL-VISIT GmbH & Co. KG
Flash Readiness
Flash readiness of the compact flash is signaled by:
• the large green READY indicator LED
15
turning on
• the modeling light turning on again when operating in
the activated Flash Check mode (pushbutton switch
13,
FC)
• an acoustical signal, provided the AUDIO mode is
activated (pushbutton
11)
Modeling light
The modeling light will be at maximum brightness when
the FULL option is activated by pushing switch
9
and the
indicator LED turns on.
By activating the PROP mode via pushbutton switch
10
the intensity of the modeling light will be proportional to
the flash power setting.
There is no separate switch for turning the modeling light
on or off. The modeling light will be OFF when both FULL
and PROP modes are deactivated at the same time,
meaning that both LED indicators, located above push
button switches
9
and
10,
are not alight. Pushing either
switch will turn the modeling light back on.
AUDIO (Acoustical Signal Function)
Push button switch
11
will activate the acoustical signal
mode for flash readiness. A short beep tone will signal
that the flash unit is ready to be triggered again.
AUDIO (Flash Discharge Counter Function)
Pushing and holding button AUDIO for approx. 3 seconds
will show the number of flash discharges since last re-set
in displays FLASH/s and ENERGY. Flash count starts at
"0000", and after "9999" the count will continue starting
over again at "0000".
By pushing control knob
4
the counter is re-set to zero
("0000"). The flash counter mode can be deactivated by
pushing the AUDIO button; otherwise it will do that
automatically after 5 seconds with the displays returning
to normal operation.
11:
AUDIO
15
13:
FC
11:
AUDIO
9:
FULL
10:
PROP
OFF
11:
Special
function
