Henny Penny PFG-690, Technical Manual, Page: 13 / 106

Model 690
1-7
Problem Cause Correction
PRESSURE SECTION (Continued)
Pressure does not
•
Not enough product in fryer
•
Place proper quantity of
build or product not fresh fresh product within
frypot to generate steam
•
Metal shipping spacer not
•
Remove shipping spacer;
removed from deadweight see Unpacking section of
Operator’s Manual
•
Lid open or not latched
•
Close and latch lid
•
Solenoid valve leaking or
•
Check or clean solenoid
not closing valve per maintenance
section on the solenoid valve
•
Deadweight valve leaking
•
Repair per maintenance sec-
tion on deadweight valve
•
Pressure not programmed
•
Check programming
•
Lid gasket leaking
•
Reverse gasket or lid needs
adjusted; see sections 2-10 &
2-13
•
Safety relief valve leaking
•
Check and replace if
necessary per maintenance
section on the safety relief
valve
• Pressure pad broken or crushed • Replace pressure pads
1-3. TROUBLESHOOTING
(Continued)
Oct. 2002