Henny Penny HC 900, Service Manual

Page: 23 / 66

Henny Penny Model HC-900
3-7. OPERATING CONTROLS Special Program Mode - Consists of Setup Mode and Tech Mode.
900 and 903 CDT
(if applicable)
Setup Mode
(Continued) • Fahrenheit or Celsius
• Initialize System - One button programming for times and
temperatures
Fahrenheit or Celsius
1. Press and hold the PROGRAM button for 4 seconds.
2. “Setup” and “Tech” is displayed.
3. Press a timer button under the word “Setup”.
Ex: Setup
Press either 1 or 2.
1 2
4. Enter access code 1, 2, 3.
5. “Setup deg.” “F” is displayed.
6. Press the INCREASE or DECREASE buttons to toggle from
“F” (Fahrenheit) and “C” (Celsius).
7. When correct setting displays, press the PROGRAM button to
move to Initialize System, or press and hold the PROGRAM
button to exit programming.
NOTE
CE and International units must have the temperature readings in
Celsius. Follow above procedures and set to “C”.
Initialize System
1. Press and hold the PROGRAM button for 4 seconds.
2. “Setup” and “Tech” is displayed.
3. Press a timer button under the word “Setup”.
Ex: Setup
Press either 1 or 2.
1 2
4. Enter access code 1, 2, 3.
5. “Setup deg.” “F” is displayed.
401 3-9