H.I.T. 5000
COATS H.I.T. 5000 Changer • 9
1.
Using a grease gun and chassis grease, lubricate
chuck hub bushing once every month.
2.
Remove the side panels and lubricate the four
posts that guide the carriage up and down. Also, with
a grease gun, lubricate the bushing sprocket tube.
Lubricate these parts at lease once every month.
3.
Using a grease gun and chassis grease, lubricate
the disk shaft on the bead roller tube once every
month.
4.
Grease chain and check the tension once every
month and adjust if necessary.
5.
Check hydraulic reservoir once every week. With
all hydraulic cylinders retracted, the oil level should be
approximately two inches below the top of reservoir.
Add COATS
®
hydraulic oil (P.N. 8120454) to this level.
6.
Change the oil filter once every six months. Screw
off the filter and replace with service part number
8001631.
Maintenance
