10
3 Technical Data
4 Installation
– Keep the pressure hose as short as possible. Short switch-on and switch-off times for
the diaphragm valve are within reach.
– Keep product feedlines as short as possible. The shorter the feedline the smaller the
specific resistance and the lower the dispensing pressure can be.
– Avoid kinking of feedlines and pressure hoses.
– Typically, the pressure hose and product feedline should not be longer than 2 m.
– Do not use inflexible hoses and feedlines, so that unnecessary loads on the fittings will
be avoided.
– Keep all fittings tight.
– No direct sunlight; no UV light!
Clamping area
32
95
32
25.5
52
26.5
20
15
R1/8
R1/8
