10.
11.
| Original User Manual | Item number 130-300-000 I Subject to change
| Original User Manual | Item number 130-300-000 I Subject to change
EN
EN
Responsibilities of the operator (in commercial use)
The operator of the appliance is required to fulfill their obligations under health and safety laws. Aside
from the safety instructions given in this manual, all regulations on safety, accident prevention and
environmental protection applicable to the place of operation must be observed.
The operator is required to become familiar with all applicable health and safety regulations and
establish by means of a risk assessment any additional hazards that arise from the specific working
conditions present in the appliance’s place of operation. The operator must incorporate the findings of
this risk assessment into instructions on how to operate the appliance.
The operator is required throughout the service life of the appliance to verify that the operating
instructions they created comply with the latest revision of all applicable rules and standards and revise
them if necessary.
The operator is required to clearly assign and define the responsibilities for installation, operation,
maintenance and cleaning and ensure that all employees handling the appliance have read and
understood the manual. The operator must furthermore train their staff and inform them about the
hazards involved at regular intervals.
The operator must authorize the operating personnel to reject instructions from third parties which
breach safety regulations.
The operator must provide the personnel with the personal protective equipment (PPE) they require to
perform their work. The user manual must be kept in a location where it is available to all personnel
working at the appliance.
The operator is furthermore responsible for ensuring that the appliance is in proper technical condition
at all times. The specified maintenance intervals must be observed. The operator must establish a
procedure that keeps the appliance or individual parts from being put into operation until all maintenance
steps have been completed properly and in a timely manner.
The operator must keep all safety instructions and warnings attached to the appliance in legible
condition and replace them as necessary.
5. Technical specifications
The type plate of the appliance is found on the housing.
Warning:
Do not use the appliance without knowledge of the user manual.
Do not use the appliance without the filter insert.
Do not block the intake vents of the appliance on multiple sides during operation.
Do not insert any foreign objects into the appliance.
Do not climb onto the appliance.
The appliance is not intended for use in medical or industrial environments.
The appliance is not suited for vacuuming off dust.
The appliance is not designed to vacuum off burning or smoldering materials or
gases that are easily flammable or explosive.
Do not operate the appliance unless it is in a stable position.
Not designed for operation in damp rooms.
Do not operate in the immediate vicinity of heat sources.
The appliance is not suited for use in explosive atmospheres.
Length (mm)
407
Width (mm)
457
Height (mm)
1086
Sound pressure level at distance of 1 m at
nominal power (dB (A))
Sound pressure level at distance of 1 m at
maximum volume flow (dB (A))
42 under free-field conditions
48 under free-field conditions
Filter change interval (months)
approx. 6
Serial numbers
13030000AB_01_21_00001 to
13030000AB_01_21_XXXXX
Installed power (kW)
0.76
Rated current (A)
3.3
Appliance fuse (A)
T5.0
Voltage/frequency (V/Hz)
230 V~50 Hz
Degree of protection
IP X0
Rated volume flow (m³/h)
600
Filter efficiency
≥ 99.995 % of all particles including bacteria and
viruses
Filter combination
HEPA H14 filter set
Environmental temperature - transport (°C)
-25 °C - 55 °C
Environmental temperature - operation (°C)
10 °C - 40 °C
Relative humidity (%)
20 % - 70 % (non-condensing)
Air quality
Non-condensing
Total weight (kg)
50
