12
EN
4.10 Maintenance / Care / Repair
The perfect operation and safe use may be ensured
only through the correct use of the appliance, as
well as the compliance with the operation instruc-
tions, the corresponding specifications and the care
and cleaning indications.
This applies both for the compliance of the provi-
sions of law on appliance safety (GSG) and the exi-
sting specifications of ZH 1 and VBG on accident
prevention.
RECOMMENDATION:
Before cleaning or maintenan-
ce works, the appliance should not be connected
with voltage through the installed main switch /
fuse. The appliance should never be sprayed with
water or high pressure cleaning aid, because any
insertion of water in the electrical elements may af-
fect the regular operation of the appliance as well as
the protection against electrical shock (insulating
protection).
We recommend that you prepare a relevant mainte-
nance agreement for all maintenance and repair
works with our company (or with a service team /
workshop of an authorized local dealer who sold the
appliance).
All works / repairs performed in this appliance must
be reported on the last page of the operating in-
structions, along with the signature / company
name.
Substantially, no safety arrangement should be put
out of operation. If the disassembly of individual
safety arrangements is required, e.g. for mainte-
nance or repair works, the reassembly of the re-
levant safety arrangements should be performed
immediately after the completion of works.
4.10.1 Unloading the water from the dishwasher’s tank (dispenser)
• Turn OFF the power of the dishwasher
• Empty the washing dispenser removing the over-
flow hose A.
• Remove the filter B and clean it carefully with wa-
ter.
• Rinse the washing compartment to remove any
dirt residues.
• Then, reassemble the parts in reverse order. The
appliance should never operate without a filter.
• During non-operation, the door should remain
half-open or completely open (in order to avoid
odours).
4.10.2 Regular maintenance and cleaning works
Regularly, you should remove the rotating arms and
sprinkler, clean them carefully with water and repo-
sition the parts in reverse order. This work should
be performed with great care.
PAY ATTENTION TO THE CORRECT POSITION OF FILTERS AND SPRINKLER!
Do not clean the sprinkler’s injectors with tools or sharp
objects.
You may clean the appliance with warm water and co-
nventional cleaning aids. Rub with water and then let it
dry. The stainless steel parts should be treated with
special means for steel and you should never clean
them with steel wire, brush, etc. Also, you should never
let them touch the surface, since even the lightest con-
tact with the surfaces may cause rust formation. You
should use brushes made of polymer plastic or natural
brushes or thin wire.
You should take care to move towards the smoothing
direction, so that you will not scratch the surface. Final-
ly, rinse with clean water and dry thoroughly.
We remind you that corrosion (rust formation) on stain-
less steel surfaces is not created by itself, but rather
due to the use of improper cleaning aid (e.g. whitening
or particularly caustic cleaning aid based on chlorine).
Following a particular period of use, calcium sediments
are formed in the internal walls of the dispenser (due to
mineral particles in the water), which may affect the
correct operation of the appliance. For this reason, re-
gular removing of salt formations is required.
We recommend letting this work (removing of salt for-
mations) to be performed by specialized personnel (or
by an authorized local dealer who sold the appliance).
