Hendi 211137, Manual

Page: 16 / 48

16
EN
Troubleshooting
If the appliance does not function properly, please check the below table for the solution. If you are still
unable to solve the problem, please contact the supplier/service provider.
Problems Possible causes Possible solutions
The appliance is connected to
the power supply but the heating
indicator does not light up.
Power plug is not connected
properly to the electrical power
supply outlet.
Check again to make sure it is
connected properly.
Heating indicator defective. Contact the supplier.
RESET indicator light up & Hi-lim-
iter activates.
RESET the Hi-limiter [See ==> RE-
SET the Hi-limiter (Dry-boiling pro-
tection)]
The appliance does not heat up but
the heating indicator light up.
Temperature dial defective Contact the supplier.
Heating element defective Contact the supplier.
Technical specification
Single-walled liquid boilers (Drip tray not supplied)
Item no. 211137 211144 211151
Operating voltage and frequency 220-240V~ 50 / 60 Hz
Rated input power 1,300W 2,250W 2,600W
Approx. capacity 10L ± 0,3L 20L ± 0,5L 30L ± 0,5L
Protection class Class I
Temperature setting 30°C ~ 100°C
Inner dimensions Ø220x(H)324mm Ø310x(H)336mm Ø310x(H)468mm
Dimensions 310x330x(H)490mm 360x380x(H)598mm 400x420x(H)650mm
Double-walled liquid boilers (Drip tray supplied)
Item no. 211168 211175
Operating voltage and frequency 220-240V~ 50 / 60 Hz
Rated input power 1,300W 2,250W
Approx. capacity 9L ± 1L 18L ± 2L
Protection class Class I
Temperature setting 30°C ~ 100°C
Inner dimensions Ø220x(H)324mm Ø310x(H)336mm
Dimensions 310x330x(H)490mm 360x380x(H)598mm
Remark: Technical specification is subjected to change without prior notification.