8.5 Split point setting
Using this function you can select a point to split the whole claviature into two areas.
1.
Press
[SPLIT/TWIN]
once to activate the Split mode.
ð
The LED of the button lights.
2.
Keep the
[SPLIT/TWIN]
button pressed for two seconds.
3.
Use the arrow buttons
[TRANS]
to specify the desired split point.
8.6 Twin mode
In Twin mode, the keyboard is divided into two areas with the same voice. The area
on the right comprises the piano keys C#3 to C7, the area to the left comprises the
piano keys A1 to C3.
1.
Press
[SPLIT/TWIN]
twice to activate the Twin mode.
ð
The LED of the button lights. The display shows
‘Twin: ON’
selection.
2.
Press
[SPLIT/TWIN]
again to deactivate the Twin mode.
ð
The LED of the button goes out. The display shows
‘Twin: OFF’
.
8.7 Tempo / Tap function
This function allows you to adjust the playback speed of the demo songs and to
switch between 4/4 and 3/4 time.
1.
Press
[TEMPO/TAP]
to activate the setting mode for playback speed.
2.
Use the arrow buttons
[TRANS]
to set the desired playback speed in the range
of 20 … 280
or
3.
Press
[TEMPO/TAP]
four times in the desired tempo. This tempo is then taken as
the playback tempo.
4.
Press both arrow buttons
[TRANS]
simultaneously to reset the value to the
preset
‘Tem: 120’
.
Press
[TEMPO/TAP]
three times run the current demo song in 3/4-time.
8.8 Metronome
Press
[METRONOME]
to turn the Metronome on and off.
Functions
digital piano
38
