8
Functions
8.1 Playing demo songs
16 demo songs are stored in the memory of the digital piano. Press
[DEMO]
to enter
the DEMO mode. The first demo song is shown and played. During playback, you can
use the arrow buttons
[TRANS]
to switch between the demo songs at will.
Press
[DEMO]
again to stop playback.
8.2 Reverb and Chorus effects
The sound of the digital piano can be influenced by the built-in Reverb and Chorus
effect. Press
[EFFECT]
to turn the effect function on and off again.
Specify the effect settings from the control menu, see
Ä
Chapter 7 ‘Operating’
on page 20
.
8.3 Selecting timbre
16 timbres that can be assigned to the keyboard are stored in the memory of the dig‐
ital piano. Press the associated one-touch key to activate the desired timbre, see
Ä
Chapter 6 ‘Control panel and connections’ on page 17
.
Use
[BANK]
to toggle between the upper (button LED off) and lower timbre (button
LED on) of a one-touch key.
8.4 Split mode
In Split mode, different voices can be assigned to certain areas of the keyboard (to
specify the keyboard split point, see the following section).
1.
Use the one-touch timbre buttons to select the voice you want to assign to the
right hand.
2.
Press
[SPLIT/TWIN]
once to activate the Split mode.
ð
The LED of the button lights.
3.
Press the one-touch key of the timbre that you want to assign as the voice of
the left hand.
4.
Adjust the volume of the voices in the functions menu, see
Ä
Chapter 7 ‘Oper‐
ating’ on page 20
.
5.
Press
[SPLIT/TWIN]
again to deactivate the Split mode.
ð
The LED of the button goes out.
Functions
DP-501 MK II
37
