Hema HN5i Quick Start Manual Download Page 37

Page: 37 / 114

HN5i Quick Start Guide

Back button

: Return to previous screen

Frequency selection control

: Slide the green arrow to selected the desired

frequency. You can also use the left & right arrows to move the green arrow slider in
.1 MHZ increments

FM Function switch

: Use this switch to turn the FM transmitter function on

NOTE
The NAVIGATOR will NOT output sound through the internal speaker while
the FM function is switched ON.

AV IN - Reversing Camera Function

With the reversing camera (sold separately) connected and powered on, the AVIN

screen shows a camera's eye view.

NOTE
Depending on the make and type of camera fitted, the view may differ
slightly.

AV IN Screen buttons

For use with a reversing camera, the control buttons located at the bottom of the

AVIN screen are not required.

Player Menu

Summary of Contents for HN5i



















































































































Search results

Summary of Contents for HN5i

Reviews:

Brands by name

Popular brands

Hema HN5i, Quick Start Manual

Search results

Summary of Contents for HN5i

Reviews:

Brands by name

Popular brands