Quick Installation Guide
Document
WERA4-Quick-US-200917
Page 25 of 73
Take care for the correct connection of cable 9028 for DIO72 and control port. The
DIO72, #1 is the left one. The two flat cables are marked with A and B.
A crossed LAN cable 2173 is needed to connect the RTU with the external PC.
It’s optional to plug the Y-cable 1965 in the PS2 socket of the RTU to connect
keyboard and mouse. Newer ones support USB mouse/keyboard.
A standard extension flex cable is used to connect the control ports in between the
racks.
If the system is used with only one RER, terminate the second LoD out with
50 Ohms / 0,5 W
Main Power connection
1.16.1
– DIO72, #1, A & B
1.17.1
– CPCI, keyb. ,mouse
1.17.2
– CPCI, LAN 1 (Ethernet)
Input from RER Control
1.19.2
– DIO72, #1, B
1.19.1
– DIO72, #1, A
1.20.1
– Test in & out
Status & Remote Control Ports
System Power Supply
Optional: Dual Frequency Control <-> PA
Figure 29
: FCR back view, connection of digital data links
Please note
:
Never cover any air slots.
Since there are slots in the bottom lid of the FCR and the RER also, do not operate parts
of the system on a desktop without putting some "foots" underneath the lowest rack.
For this reason please use only the recommended order for setting up the rack:
o
PC
WERA Interface PC
o
FCR
Frequency Control Rack
o
RER
Receiver Rack
o
PAR
Power Amplifier Rack
