13
5.0 GLOBUS 201/201C
1 Green Led - it glows if power is on, unit is ready for operation
- it blinks if there are input voltage anomalies (overvoltage-undervoltage)
- after turning the unit off it blinks for a few seconds and then it stops.
2 Yellow Led - it glows indicating overtemperature cutout. Let the unit to cool
down. Thermostat will automatically reset and you can continue
welding.
3
Tig/Stick Selector
4
Welding Current Setting
5
Down Slope Time Setting
6
Post Gas Time Setting
7
50mm² dinse positive socket
8
50mm² dinse negative socket
9 Torch
Trigger
Connector
10
Gas Output Connector
11
Gas Input Connector
GLOBUS 211
