38
Memory Thermometer for the last 32 measurements
In the switch on state, press the “ROOM” button and hold for
3 seconds, you will abtain the last temperature measurement,
and allows for a view of the last 32 measurements. Press the
“SURFACE” button for review. Press the “BODY” button to exit
data memory. Press the “SRUFACE” button and hold for 3
seconds, all data in memory will be deleted, then press the
“ROOM” button and hold for 3 seconds, the screen will display
“CLr”.
Button LANGUAGE
When the screen shows “ON”, the voice opened.
When the screen shows “OFF”, the voice closed.
Measurement in °C or °F
In the switch on state, press the “BODY” button and hold for
3 seconds, the screen will display “F4”, press the “BODY” button
once again, the screen will display “F5”, Press „SURFACE“ button
to get degrees Celsius, press “ROOM” button to get degrees
Fahrenheit. Confirm by press the „BODY“ button.
NOTICE!
To obtain the internal temperature of the body, always
use the „BODY“ mode. Please, make sure to select
„Sufrace temp“ mode for an external area reading.
