TB20, strain gauge weighing module | Edition 1 | 21.12.2018
65
9.3
Read out and change offset/sampling point values with the TB20 ToolBox
With the help of the TB20 ToolBox, the measurement value of the load cell and the status displays of
the weighing module can also be displayed in online operation without a connected master control
system.
The configuration can be temporarily changed for test purposes in
simulation operation
with
continuous measuring.
Mark the module and call up the "General" window
Edit the parameters to be changed in the left window.
Changed lines and the window turn yellow.
click in the left window. The window briefly turns green following acceptance.
When a prohibited value is entered, a warning appears and the window turns red. Activation is
then no longer possible.
Malfunction of the control system!
The simulation operation interrupts the bus communication. The coupler logs out from the bus during
simulation operation.
