TT4000 Series
Operating Instruction
8
3
Installation
3.1
Unpacking the label printer
⇒
Lift the label printer out of the box via the straps.
⇒
Check label printer for damage that may have occurred during transport.
⇒
Check delivery for completeness.
Pack contents (basic version)
•
Label printer
•
Empty cardboard core, mounted on ribbon take-up hub
•
Tear-off plate
•
Power cable
•
Documentation and driver on CD
Retain the original packaging for subsequent transport.
3.2
Setting up the label printer
CAUTION!
The device and the print media can be damaged by moisture and water.
The label printer may only be set up in a dry place protected from sprayed
water.
⇒
Set up printer on a level surface.
⇒
Open cover (1) of the label printer.
⇒
Remove foam transportation safeguards near
the print head (2).
Figure 1:
Removing the transportation safeguards
