Hellenbrand 109248, Owner'S Manual

Page: 11 / 18

11
AQUATECH WATER PUMPS
550 Series Super Flow Pump
Key Operational Benefits:
• Unparalleled performance
• 1.5 to 5.5 GPM (20 lpm) flow
• Up to 100 psi (7 bars) pressure
• 7 year design life
• Highly efficient
• Minimal pulsations
• Whisper quiet at lower flows
• Self priming
• Can run dry without damage
• Chemically resistant versions
Technical Specifications:
OPERATION:
The 550 pump can draw water from a holding tank and pressurize it, or boost the pressure from a low
pressure source. It is designed to operate intermittently, but most versions can run continuously for several hour inter -
vals. It can be operated in demand mode controlled by an integral pressure switch, or in delivery mode controlled by an
external power switching device.
POWER:
The power demand varies depending on flow and pressure from 50W to 200W. Motors are available in various
configurations from 12 VDC to 230 VAC. Transformers or DC power supplies are optional and must be ordered sepa -
rately if applicable. Standard terminations are 12” long 16 AWG lead wires with a stripped end, connectors or cords with
plugs.
MOUNTING:
A steel mounting base with four hollow rubber grommets is standard and included at no extra cost. The
pump may be mounted in any position.
FITTINGS:
The standard pumphead has a .750” port opening that accepts “quick-connect” beverage style O-ringed barb
fittings, or John Guest fittings that can be used with 3/8”, 1/2”, 5/8” or 3/4” tubing. The pump can also be ordered with a
1/2 NPT female port. Always consult the factory for recommendations that will optimize your system.
DELIVERY PUMP OPTION:
Part No. Description
107368 4.90 GPM open flow – QD ports – 60 PSI – 115 volt with cord
2.15 GPM @ 40 PSI - 115 Volt