10
\
ENTER VALVE TYPE
1.0 / 1.25 / 1.5 / 2.0 / 2.0L
ALTERNATOR SYSTEM (As Needed)
OFF
SET RINSE OPTION
OFF
AUXILIARY MAV TRIGGER
RECLAIM
RECLAIM START
20:00 (Ba12 mins)
RECLAIM DURATION
48:00 (Remainder of Brine/Slow Rinse)
AUXILIARY INPUT
OFF
SET CYCLE 1
FILL
SET CYCLE 2
SOFTENING
SET CYCLE 3
BACKWASH
SET CYCLE 4
REGENERANT DRAW DN
SET CYCLE 5
RINSE
SET CYCLE 6
END
ALTERNATE FILL TRIGGER
OFF
Press NEXT &
for 3 seconds.
Choose “SOFTENING”
Or “FILTERING”
“SOFTENING”
1 – FILL # of SALT
SEE SPEC
2 – SOFTENING TIME
120
3 – BACKWASH TIME
SEE SPECIFICATION
4 – DRAW TIME
SEE SPECIFICATION
5 – RINSE TIME
SEE SPECIFICATION
CAPACITY
SEE SPECIFICATION
Set RESERVE
AUTO
Set REGENERATION TYPE
DELAYED
RELAY DRIVER 1
OFF
RELAY DRIVER 2
OFF
SERVICE CALL
OFF
Press NEXT &
for 3 seconds.
SET HARDNESS
PER APPLICATION
SET DAYS BETWEEN REGEN
14
SET HOUR OF REGENERATION
2:00 AM
SET MINUTE OF REGENERATION
2:00 AM
WATER MANAGEMENT SYSTEM PROGRAMMING:
or select cycle sequence
options as desired
Use
arrows to select
H125 Series is factory
programmed with fill
cycle as final cycle.
Press
and
arrows to select desired option. Press NEXT to go to next step (Press REGEN to go to previous step)
Press NEXT &
for 3 seconds or until display changes. Release and Press NEXT &
for 3 seconds again until valve
type is displayed.
Summary of Contents for 109248
Page 3: ...3 INSTALLATION DRAWING...
Page 4: ...4 MAV INSTALLATION DRAWING...
Page 15: ...15 FLOAT ASSEMBLY PART NUMBER 109148...
Page 16: ...16...