Hella 2-1NA 010 047-811, Mounting Instructions

Page: 15 / 28

15
D CH A
C max.
400 mm
C max.
400 mm
provide optimum light.
Replace bulb in accordance with
the drawing. Do not touch bulbs
with bare fi ngers! Use a paper
towel or similar.
Electrical connection:
From page 6
By way of example for three coun-
tries, the following table is intended
to show with which lighting func-
tions fog lights may be combined.
It is however essential that coun-
try-specifi c laws are observed.
Check the lighting system.
Fasten the connection cables
securely.
Have the fog lights adjusted at a
specialist garage.
Only correctly adjusted lights
Another tip:
• Always keep the light lenses
clean. Dirt can absorb more
than 80% of the light output.
You can drive safely if you can
see well and therefore also be
seen well.
Do you have spare bulbs and
fuses in your car?
Dipped beam
Dipped beam
and position light
Position light
Main beam
and position light
Bulb replacement:
Page 10
Fit the relay with the connection
terminals pointing downwards in a
waterproof manner.
If required, fi t a switch (see Acces-
sories) into the dashboard, or fi t a
switch which is intended specifi cal-
ly for your car.
Lay and connect the cables in
accordance with one of the 4
circuit diagrams.