Hella 2-1NA 010 047-811, Mounting Instructions

Page: 14 / 28

14
Mounting steps:
Page 4, 5
1.200mm max.
400mm
max.
600mm
min.
250mm min.
It is possible to mount the lights
in an upright or pendant position.
The lights must not vibrate or jut
out above the bonnet, and must
be mounted symmetrically. When
fi tting, the attachment dimensions
in the drawing listed are to be
observed. Determine the mounting
position and mark the fastening
points. Drill using a 3 mm drill bit,
and drill out to 8.5 mm.
Seal drilled metal parts with rust
protection 1.. When fi tting the
lights, ensure that the „TOP“
marking on the housing always
points upwards. Light points
upwards. Align the light in accor-
dance with the drawing and tighten
the screws.