BPC-Tool
BPC client App
Configuring the BPC client App
8.3
Configuring the BPC client App
8.3.1
Configuring the language
Here you can set the language version if the software is multilingual. After
having set the language, the BPC client App is displayed in this language.
To configure the language:
1. Select
Language
under
> Settings
.
The selection of languages depends on the specific software.
2. Select the required language.
The selection is saved automatically.
8.3.2
Entering the workshop data
Proceed as follows to enter company or workshop data:
1. Select
Workshop data
under
> Settings
.
2. Enter the company name under
Company
.
3. Repeat step 2 to make more entries.
4. Confirm your entry with
>OK<
.
Inputs are saved automatically.
8.3.3
Printing with a standard PC printer
Here you can set the default printer for printing with the PC.
If there is no additional printer connected to the tool, it is possible to print
with the printer of a PC system. This requires a connection between the
tool and the PC. The connection to the PC can be established via the USB
port, Ethernet, Bluetooth, WLAN or UMTS.
NOTE
If the default printer is
not
selected, you are prompted to
select a printer when a print job is submitted.
To print to the default printer:
• Activate
Use default printer
under
> Settings
.
A blue check mark is set in front of
>Use default printer<
.
31
