![background image](http://html1.mh-extra.com/html/hella-gutmann/bpc-tool/bpc-tool_operating-instructions-manual_2121462022.webp)
Working with the BPC-Tool
BPC-Tool
Performing a battery test
7.3
Performing a battery test
NOTE
The BPC-Tool can display additional instruction texts on
request. To view additional instruction texts run through
steps 1–4 as described under
Configuring instructions
(Page 16)
.
Proceed as follows to perform the battery test:
1. In the main menu, select
Battery test
and confirm with
Select
.
2. Select the battery position and confirm with
Next
.
3. Select the battery type and confirm with
Next
.
4. Select additional subitems if required.
5. Select the battery standard and confirm with
Next
.
6. Enter the cold cranking amps and confirm with
Next
.
7. Select additional subitems if required.
8. Direct the front of the BPC-Tool at the battery.
9. Confirm the temperature display with
Next
.
The message
Perform battery test for discharged battery?
appears if
the battery is flat.
Compared to the simple battery test, the battery test for discharged
batteries performs additional tests so that the battery can be quickly
and reliably evaluated despite low voltage.
10. If necessary, perform the battery test for discharged batteries with
Yes
.
Alternatively, you can choose not to perform a battery test for
discharged batteries by selecting
No
. In this case, a simple battery test
is performed.
22