![background image](http://html1.mh-extra.com/html/hella-gutmann/bpc-tool/bpc-tool_operating-instructions-manual_2121462023.webp)
BPC-Tool
Working with the BPC-Tool
Performing a start/stop test
11. Follow the on-screen instructions.
Battery test is performed. The battery test result appears.
If the battery test was successful, the following appears:
•
Good - recharge.
Allow the battery to charge and put back into operation.
•
Battery OK.
Put battery back into operation.
•
Cell defective, replace battery.
Replace battery and test it again, if necessary.
•
Replace the battery.
Replace battery and test it again, if necessary.
This message may also be displayed if the terminal contact with
the battery is insufficient, for example. In this case, disconnect the
battery and test it again by selecting
>Outside the vehicle<
.
12. Return to the main menu with
Next
.
7.4
Performing a start/stop test
NOTE
The BPC-Tool can display additional instruction texts on
request. To view additional instruction texts run through
steps 1–4 as described under
Configuring instructions
(Page 16)
.
Proceed as follows to perform the start/stop test:
1. In the main menu, select
Start/stop test
and confirm with
Select
.
2. Run through steps 2–10 as described in the section headed
Performing a battery test (Page 22)
.
23