Helios ultra Silence MiniVent M1/150 N / C, Installation And Operating Instructions Manual

Page: 30 / 56

MiniVent M1/ 150 N / C
EN EN
Installation and Operation Instructions
6.5 Mounting
6.6 Operation
In order to ensure the smooth functioning of the fan, the following must be checked on a regular basis:
- Appearance of dust or contaminant deposits in the housing or on the motor and impeller
- Freewheeling of the impeller
- Occurrence of excessive vibration and noise
In case of problems with one of the aforementioned points, maintenance must be carried out according to the
instructions in chapter 8.
- Length of single conductors 135 mm
- Stripping length 8 mm
- Strip sheathed cable flush with cable duct
10
1. Place and screw terminal compartment cover
ù
on
plastic casing (Pos
â
)
2. Then place and snap-in facia
ò
fig.11
Mount guide
vane with
back draught
shutter at the
end of the
duct or just
omit it.
Duct channel
90° bend
Assembly in cramped
conditions
Standard installation
WES 1.. or
TWH 1..
Guide vane with
back draught
shutter
Fan
Room side
Outside
fig.12
fig.10
ò
ù
â
â
fig.9
135 mm
8 mm
m
NOTE