49
5.10. Text Message Alarm Notifications
The Platinum Series Power Supply can send text message alarm
notifications to a cell phone by sending the alarm e-mail to an
address at the mobile phone provider. On the Network Setup
page,
enter the address for your phone in one of the Recipient E-mail
Addresses
field. For example, to send a text message to an AT&T
phone, enter [email protected], replacing cell number
with your
10-digit cell phone number.
Here are some address formats for other mobile phone providers:
AT&T
cellnumber
@txt.att.net
Verizon
cellnumber
@vtext.com
T-Mobile
cellnumber
@tmomail.net
Virgin Mobile
cellnumber
@vmobl.com
Nextel
cellnumber
@messaging.nextel.com
Bell Mobility
cellnumber
@txt.bell.ca
Rogers
cellnumber
@pcs.rogers.com
Telus
cellnumber
@msg.telus.com
Virgin Mobile (Can)
cellnumber
@vmobile.ca
5.11. Network Troubleshooting
I am unable to access the embedded Web server:
•
Check that you are using the correct IP address to access the
power supply’s embedded Web server by viewing the Network
Status
screen on the Control Panel display (see the Control
Panel Menus section for instructions on how to access the
Network Status screen). The IP address for the power supply
may have changed if DHCP is enabled.
•
If the Network Status
screen on the Control Panel display shows
Network Not Connected, check the network cable connections to
the power supply and the network.
•
Ensure that you are using the correct type of network cable. An
industry standard "crossover" cable should be used for
