Rectangular flexible connector –
AIR1-VS
Helios Ventilatoren
Service / Information
D
HELIOS Ventilatoren GmbH + Co KG · Lupfenstraße 8 · 78056 VS-Schwenningen
A
HELIOS Ventilatoren · Postfach 854 · Siemensstraße 15 · 6023 Innsbruck
F
HELIOS Ventilateurs · Le Carré des Aviateurs · 157 av. Charles Floquet · 93155 Le Blanc Mesnil Cedex
CH
HELIOS Ventilatoren AG · Tannstrasse 4 · 8112 Otelfingen
GB
HELIOS Ventilation Systems Ltd. · 5 Crown Gate · Wyncolls Road · Severalls Industrial Park · Colchester · Essex · CO4 9HZ
Please keep this manual for reference with the unit!
Print no. 28 695-001/18-0374/V01/0919
www.heliosventilatoren.de
– Apply the required tightening torque (20 Nm
for screw size M8) for the flange screw con-
nection crosswise with a torque spanner.
3.0 Maintenance
– Clean the flexible connector with soapy wa-
ter and then with clear water. Do not use
sharp-edged objects, wire brushes or sand-
paper.
– In the context of a fan check, the connecting
pieces must be visually inspected.
Check for:
– External damage to the bellows or flange
such as hairline cracks, abrasion points,
holes, embrittlement or extreme kinks.
– inadmissible movements, displacement and
installation length.
– Corrosion and wear to the entire component.
– Tight fit of the screw connection
General information:
– Do not paint rectangular flexible connector!
Solvents damage the surface. Thus, long-last-
ing functioning is jeopardised
– In case of welding and cutting work, cover
the fabric bellows and protect against heat.
The anode and cathode of the E-welding con-
nection must always be on the same section
of ducting and must not be separated by a
flexible connector.
Fig.4