EN
EN
Cold Water Cooling Register AIR1-KR KW
Installation and Operating Instruc
tions
13
6. Mount the module connector to the AIR1 unit or external auxiliary heater and the cooling register. Tighten the screws
7. Mount the mounting bracket to the cooling register. Connect AIR1 unit to cooling register as follows (see Fig.24).
8. Fasten the pipe bend below the condensate tray. Ensure that the pipe is water-tight (see Fig.25).
9. Cooling can produce condensate. The correct condensate connection to the sewage system must be ensured
before commissioning. A siphon or condensate pump is required for this purpose. The condensate must drip
freely into the drain after the siphon or condensate pump.
Fig�23
Fig�24
Fig�25
