5
6X-1090J
1.0 Getting Started
NOTE:
All graphics contained within this document, including screenshots and other displays, are for reference use
only and are subject to change.
.
Installation and testing of the camera system can be performed with the built-in Helios Web Interface ap-
plication.
1.1 Factory Default IP Address and Settings
The camera system is shipped with:
•
Default IP address: 192.168.2.150
•
Subnet mask: 255.255.0.0
•
Gateway: 192.168.2.1
1.2 System Requirements
In order to test the camera system you need the following items:
• Laptop or desktop computer (for recommended computer specifications see Section 1.3)
•
100/1000BASE-T network card installed in your computer
•
Microsoft Internet Explorer, version 8 or 9
•
100/1000BASE-T network switch
•
Ethernet CAT5e cable
1.3 Recommended Computer Specifications
The following are recommended computer specifications to run and operate a camera system:
•
CPU: Intel i7-860S 2.53 GHz or better
•
Operating system: Windows XP Service Pack 3 (SP3) or better
•
Memory: 4GB DDR3@1066MHz or better
• Hard Drive: 7200 rpm – minimum speed with sufficient free space
•
Video card: NVIDIA® GeForce® 9800 GTX+ with 512 MB RAM or better, or high-end
ATI Radeon™ HD series
•
Monitor: LCD monitor with 1920 x 1080 or better resolution
•
Web browser: Microsoft Internet Explorer version 8 or 9
WARNING:
Bonding and grounding conditions must be met to protect people and equipment.
CAUTION:
Secure the camera system before the power is applied.
