6X-1090J
14
3. You will see the Internet Protocol (TCP/IP) dialog box. Select the Use the following IP ad-
dress button in the General tab. Enter IP address: the IP address range is 192.168.2.1 through
192.168.2.254 except the IP address that already is used by the camera system. The subnet
mask must be 255.255.0.0. Click the OK button to close the Internet Protocol (TCP/IP).
4. Click the OK button to close the Local Area Connections Properties dialog box and click the
Close button to close the Local Area Connection dialog box.
General Tab
Select “Use the following IP address”
Enter an IP address which is not used
by the camera.
The IP address range is
192.168.2.1 through 192.168.2.254
except 192.168.2.150*
Enter subnet mask:
255.255.0.0
Click “OK”
Click “Close”
Click “OK”
NOTE:
* Since the subnet mask is 255.255.0.0 the IP address can be 192.168.0.1 through
192.168.255.254 except 192.168.2.150 (the default address that has been assigned to the cam-
era).
