HELI -
SCALE
Copyright ® 2010 - Reproductions interdites
www.heli-scale.fr
Pull the belt until the top of the AC and set in place
the AC box. Tender the belt with pulling the AC box
behind then secure it with screw. Do not tender the
belt too much.
The belt mustn’t scratch on the tail boom when go
in and go out of it. If the belt is touching the tail
boom, please adjust angulations of the mechanics.
When everything fit well, glue the CNC tube of the
elbow gear box to the wood part. Use epoxy glue to
do it.
Install the cover on the elbow gear box to the fuselage and secure it with screw supplied.
Trick: use EPP between tail boom of the mechanics and tail boom fuselage, in order to stop and limit
vibration.
Glue the horizontal stabilizers from bottom using
epoxy glue and do the same for the vertical fins.
Please note that the original EC-145 have not a
Straight tail boom in the main axis of the main
fuselage part: the tail boom must drift a little to
the right. Also the vertical fins are not straight
and got an angle! There is no impact during fast
translation.
Please adjust the hole of the swash plate in
order that all the servos and linkage do not
touch the fuselage. The hole is
willingly small to
be adjusted!
Use a tool like “dremel” to do this.
The upper cover got some strong magnets but
we suggest you to secure it with 2 screws from
inside (left/right side)
