HELI -
SCALE
Copyright ® 2010 - Reproductions interdites
www.heli-scale.fr
Use the wood skid to elevate mechanics on the back, the secure the system with 3mn screw into
frame of mechanics and into main wood former.
Mounting the elbow gear box belt
Prepare the pinion of the elbow gear box :
Take care about 3 washers on each side of the
pinion and the bearing.
Info: the other with pinion is already installed
into the former wood of the elbow gear box. This
one is for tender the belt
Tender the belt into the tail boom of your
mechanics. Take care that the pipe for the
linkage must be outside. We suggest that the
pipe must be scotched to your mechanics tail
boom
Use lubricant like « 3W40 » into the pipe of the
linkage. Take care that the curve must be smooth
without any hard point on the linkage.
Then make ¼ turn of your belt like in trainer
mode instruction manual and install the small
wood part with screw to secure the pinion like on
this picture.
