HELI -
SCALE
Copyright ® 2010 - Reproductions interdites
www.heli-scale.fr
Sandpaper grained S is enough to do this
Be careful a lot of cyanoacrylate glue leaves some
white marks on the windows. Try it before on a
small part!
Elbow gear box mounting
EC-145 got a specific elbow gear box. We are using belt (supplied) because it is better for vibrations
and belt can run for long times
Use the CNC elbow gear box supplied into the
kit. It is a shorter one than the ALIGN RC
original.
Take the elbow gear box, the small wood parts,
pinion and gears supplied + small screw and a
small CNC tail boom supplied also + belt
First cut the small CNC tail boom at 90mn (9cm)
Depending your mechanics, this size can be
deferent. It is easier to get a long one than a
short one!
Use a lime take over the small part of
aluminium into the tube. Otherwise it can
damage the belt
