2 of 3 | 07.12.2016
The product must only be used outside its packaging.
Take the product carefully out of the packaging.
Make sure that the product has not been damaged during transport before taking it into operation. The
light may not be operated if there are any damages to electrical parts.
Keep packaging materials away from children and pets. Asphyxiation hazard!
5. Commissioning/Battery Change
Observing the safety and warning instructions, place the solar light in the required position. Take account
of the following detection radii before fixing the light to the required wall using appropriate screws:
Now select the required operating mode by pressing the switch on the back several times. (The light
switches off first in every mode <30 Lux on)
Choose a suitable place with direct sunlight to charge the light up for the first time. Make sure that the
sun is shining directly on the solar unit on the solar LED light. Shade on the solar unit impairs the
battery's charging function.
Installation height
Detection radius
Mode A:
Automatic switch-on when darkness falls
(<30 Lux), then continuous lamp operation (at
approx. 20% brightness). Automatic switch-off
when light returns or after 5 hours at the latest.
Mode B:
Automatic switch-on. Continuous lamp
operation with approx. 3% of maximum brightness.
Automatic illumination to 100% brightness when
motion is detected. The light goes back to 3% after
20 seconds.
Mode C:
Automatic illumination to 100% brightness
when motion is detected. The light switches off
completely after 30 seconds.
Press 1x
Press 2x
Press 3x
Press 4x = light switches off
